App Profile: Watch Tuner Timegrapher

Android / Games / Puzzles
Watch Tuner Timegrapher
Installs:
Rating:
3.89
Total Reviews:
70
Top Countries:
US, JP, IT
< $5k
/mo
< 5k
/mo
Reviews: What People Think About Watch Tuner Timegrapher
BillSWPA
Rating: 3/5
Initially, I had far more failures than successes in trying to obtain good data from this app. Even worse, when using the built in microphone of my iPad, it magnetized my watch, causing a watch that typically runs at -1.1 sec./day to gain about 40 seconds in a day, and then to run about 5 sec./day slow. After purchasing a demagnetizer, my watch now appears to be back to normal. I also purchased an earbud with a microphone, and am having more success obtaining reasonably accurate results, keeping in mind that this is an inexpensive hobbyists tool rather than a professional tool costing hundreds of dollars. Although microphones do not create strong magnetic fields, speakers do create strong fields, and the speakers on an iPad are directly adjacent to the built in microphone. An iPhone appears to be a bit safer since the speakers and microphone are on opposite sides of the device, but caution would still be wise. Also, keep in mind that the earpieces of the earbuds emit a strong enough field to affect a compass needle, so keep the earpieces away when using the microphone. I would encourage the developers to revise their instructions to specify use of the earbud microphone only, and not the built in microphone.
jClabo
Rating: 3/5
Everything looks good, but readings are very inconsistent. I’m going to continue doing some testing with various setups. But it’s currently looking as though it’s so inconsistent that it’s almost useless. I’ve been graphing the timing on my watch for a very long time manually. My watch and manual measurements have been very consistent. I know my watch is not going from +24 s/d to -8 s/d and everything in between that this app is telling me. My watch runs at +1.8 secs per day according to my charts I’ve been keeping manually now for 3 months. At 2 months, I predicted exactly what my watch would read one month later. It was spot on. So I know my watch doesn’t vary as much as this app says that it does. I’m going to keep trying though.
woodlands77
Rating: 1/5
A waste of $15. This app give inconsistent readings and as a result I adjusted the Beat Error because it was telling me the BE was 3.5 to 7.5. The readings are drastically different depending on where you put the microphone and whether the case back is on or off. Before I started with this NH35 the amplitude was 274 and losing around 5spd real time. Now the amplitude is below 190 and the watch gains 5 minutes per day. I have double and triple checked for magnetism and there is none, even demagnetized to be sure. My NH35 is toast. That was the first NH35. The second NH35 is not quite as bad but after 3 times on the app I am still struggling to get it regulated. Consistently running 20-30spd slow no matter what I adjust it to with the app. I have used other apps before with better success. This is not the one and you will waste time and money trying to regulate your watch with this app. Buy a Weishi Timegrapher.
About Watch Tuner Timegrapher
Watch Tuner Timegrapher is a mechanical (automatic or manual winding) watch testing application. It displays a frequency diagram of the watch and measures rate, beat error, amplitude and beats per hour.
The application uses the build-in or headset's microphone to record audible ticks of the watch.
Use this application in a quiet environment. Any ambient noise can affect result accuracy. Complete silence is the best however noise cancelling algorithm can help to eliminate not very loud sounds.The recommended way to record the ticks is to touch the crown of the watch with the headset (earplugs) microphone.
If you don't need the frequency diagram, look at Watch Tuner app.
If you want to test only the rate accuracy, try Watch Tuner Lite.
If you have any questions, suggestions or any troubles using this app - don't hesitate to write me.
The application uses the build-in or headset's microphone to record audible ticks of the watch.
Use this application in a quiet environment. Any ambient noise can affect result accuracy. Complete silence is the best however noise cancelling algorithm can help to eliminate not very loud sounds.The recommended way to record the ticks is to touch the crown of the watch with the headset (earplugs) microphone.
If you don't need the frequency diagram, look at Watch Tuner app.
If you want to test only the rate accuracy, try Watch Tuner Lite.
If you have any questions, suggestions or any troubles using this app - don't hesitate to write me.
File size: 2328576
Launched countries: USAUCACNFRDEGBITJPKRRUDZAOARATAZBBBYBEBMBRBGCLCOCRHRCZDKDOECEGSVFIGHGRGTHKHUINIDIEILKZKEKWLBLTLUMOMGMYMXNLNZNGNOOMPKPAPEPHPLPTQAROSASGSKSIZAESLKSECHTWTHTNTRUAAEUYUZVEVNBOKHEELVNIPYMZYEBHCYMTBJBFCGJOLAMLSNTZUGZW
Minimum OS version: 12.4
Release Date: 1431617879000
Published by Bartlomiej Swiatek
Website url:
Publisher country: