App Profile: Aviation Altimeter for Watch
Android / Games / Puzzles
Aviation Altimeter for Watch
Installs:
Rating:
3.90
Total Reviews:
10
Top Countries:
US, IT, DE
< $5k
/mo
< 5k
/mo
Reviews: What People Think About Aviation Altimeter for Watch
Aircraft Owner
Rating: 3/5
Just got this app, a little disappointed about the size of the altimeter itself on the watch 5 40mm display. It seems there is room to make the instrument 30 to 50% larger. The buttons at the bottom take up too much space. Maybe use swipe, instead of buttons for settings or at least make an option
KKenosha
Rating: 5/5
I was impressed by the features and how easy it was to set up a target altitude. The issue that I had this after several minutes, the app will drop off the watch face which would then revert to its standard face. I was not able to figure out a way to set a time out to keep the app open. Unless this is user error (which is certainly a possibility), it’s not nearly as useful as it could be. Using on a series 5 watch.
UPDATE
Followed the directions to update the “Wake Screen” settings and NOW this is a really useful app. Glad to be some to give it 5 stars. Thank you!
stashoo99
Rating: 5/5
Message appears to authorize access to watch barometer. Ok does nothing. Message comes back. Emailed developer. No response. Will adjust review when problem is fixed.
I am revising my review. It now works and developer has added instructions. Thank you. My only gripe is that the top and bottoms of the altitude digits are cut off on my watch. I can still read the altitude but it takes a minute to interpret the numbers.
REVISING AGAIN. Digit clipping is fixed in latest version. With local altimeter setting the altimeter is quite accurate. So much better than GPS estimates. I can usually get current altimeter setting by asking SIRI. Nice APP
About Aviation Altimeter for Watch
The Pilot's Choice!
A complete, full-featured aviation altimeter running inside your Apple Watch Series 3 or higher!
A real barometric Altimeter, not GPS-based. Authenticl Altimeter dial with digital readout!
This altimeter allows you to set the field altimeter setting (QNH). The Altitude can be displayed in Feet, Meters, or Flight Level. You can also display the raw barometric pressure. The Kollsman window allows setting the local pressure in either inches of mercury or hectoPascals (millibars). Completely International!
Once you load the App from your phone and set your preferences with the companion iPhone App, the watch Altimeter is completely independent of the phone. Use this App without a phone nearby and without any internet connection. Set Preferences directly on the watch by Swiping left.
Swipe to the right and see your current density altitude by using the watch crown to set the ambient temperature.
Tap the AltAlert button and set a desired target altitude and range. The will show you graphically when you go out of bounds.
An extra bonus feature is an oxygen alarm to remind you haptically and visually when you exceed 12,500 ft. The alarm only functions when the Altimeter App is running on the face of the watch!
This app is Flight Tested, but NOT FAA TSO-certificated and can not be used as a primary flight instrument!
This App only works on Apple Series 3 and later Watches! Remember to allow the app to use the Fitness & Motion sensors in "Settings"
Tl;dr:
Swipe left to change Units, swipe right for Density Altitude, tap the left button to adjust the Station Pressure. Tap the right button for Alert Alert settings
A complete, full-featured aviation altimeter running inside your Apple Watch Series 3 or higher!
A real barometric Altimeter, not GPS-based. Authenticl Altimeter dial with digital readout!
This altimeter allows you to set the field altimeter setting (QNH). The Altitude can be displayed in Feet, Meters, or Flight Level. You can also display the raw barometric pressure. The Kollsman window allows setting the local pressure in either inches of mercury or hectoPascals (millibars). Completely International!
Once you load the App from your phone and set your preferences with the companion iPhone App, the watch Altimeter is completely independent of the phone. Use this App without a phone nearby and without any internet connection. Set Preferences directly on the watch by Swiping left.
Swipe to the right and see your current density altitude by using the watch crown to set the ambient temperature.
Tap the AltAlert button and set a desired target altitude and range. The will show you graphically when you go out of bounds.
An extra bonus feature is an oxygen alarm to remind you haptically and visually when you exceed 12,500 ft. The alarm only functions when the Altimeter App is running on the face of the watch!
This app is Flight Tested, but NOT FAA TSO-certificated and can not be used as a primary flight instrument!
This App only works on Apple Series 3 and later Watches! Remember to allow the app to use the Fitness & Motion sensors in "Settings"
Tl;dr:
Swipe left to change Units, swipe right for Density Altitude, tap the left button to adjust the Station Pressure. Tap the right button for Alert Alert settings
File size: 3042304
Launched countries: USAUCACNFRDEGBITJPKRRUDZAOARATAZBBBYBEBMBRBGCLCOCRHRCZDKDOECEGSVFIGHGRGTHKHUINIDIEILKZKEKWLBLTLUMOMGMYMXNLNZNGNOOMPKPAPEPHPLPTQAROSASGSKSIZAESLKSECHTWTHTNTRUAAEUYUZVEVNBOEELVNIPYKHMZYEBHCYMTBJBFCGJOLAMLSNTZUGZW
Minimum OS version: 13.0
Release Date: 1535705482000
Published by Aviametrix, LLC
Website url: http://aviation.aviametrix.com
Publisher country:
Related Apps
Circles - Smartwatch Face and Alarm Clock
4.4/5
165 reviews
PSK31
3.0/5
7 reviews
EAA Sport Aviation Magazine
0.0/5
0 reviews
QuarterMinder
4.7/5
33 reviews
Outd Log
0.0/5
0 reviews
Voice Control Timer
0.0/5
0 reviews
aeroLogbook
4.7/5
20 reviews
Cirrus SR22 Sticker App
0.0/5
0 reviews
RoomMe by Intellithings
0.0/5
0 reviews
Gate Code Keeper
0.0/5
0 reviews